I found that I was getting a somewhat cryptic error message at startup. \"Error:Partition 1 on harddisk 1 is not UNKNOWN.The system is FAT16Do you want to correct the error?\"Although I was not sure what that meant, clicked yes and got similar messages for the other two partitions. After clicking yes, I got to the main program.I think it was indicating the wrong partition as the boot partition, but could not find out how to correct it.What I really need to do is re-create / repair the MBR, but again I am not sure how to do ...

Hello,I am so sorry but I was expecting some standalone launchable program under DOS, as it was explained on your web page.But, it seems you are needing some installation process under windows.Hence, I haven\'t tested your program.RegardsFrédéric Coste

Installed on two computers. Didn\'t work, and I wasn\'t able to uninstall. When emailing tech support, this was the answer I got:>>Thank you for contacting us.Actually, our product Super Fdisk has not been available for a long time.And it was replaced by some other powerful software.Knowing more about our product, please refer to this link:http://www.easeus.com/product.htm ...>>

Thanks for helping to bail me out of a jam! Super Fdisk worked like a charm. Thanks so much.

I always used to use an older version of fdisk that came with windows 98/ME on a floppy. But when I bought a one terrabyte hard drive and tried to fdisk it with my old version, I found that it only recognised half of the terrabyte.So I downloaded your Super fdisk 1.0 version and not only could I fdisk the whole 1 terrabyte partition, I also made a boot cd disk and threw the old floppy drive away.Its easy to use, easy to see what your doing.And less confusing if you have more than one h/drive.Brian Australia.

Super Fdisk 1.0 works great. Awesome PC tool.

Need something more. This software can restore files which have been deleted in a recent past. That's why it cannot satisfy me. I wanted to get back my files which I deleted before 6 months or more. It didn't work for that. If you please think on it then more people will be benefitted. Thank you.

why Recover Data for NTFS can\'t recover a single file that is bigger than 4G?

sorry this software slows my computor down,so i had to delete it from my system.

Hello, This worked excellent for me. One of my primary slave HDD lost its partition information and was showing 119MB instead of 80GB. There was a lot of critical data that the HDD contained.PartitionGuru, free version, cured this problem within seconds.Initially I was reluctant to use because it comes for free, but since I had almost lost all the hopes, so tried PartitionGuru. This is a magical utility.Thanks to the PartitionGuru team for offering such a useful tool/utility.Naveen Mishra (naveenmishra18@gmail.com)Delhi, India.

had no luck with converting a FAT32 to FAT and utilizing it with software that requires FAT. The computer says it is FAT but it may be my hardware/software. The program is very easy to use and simple to understand. If you know what partitions are, then you can figure this program out without a Readme.txt file. Two thumbs up.

Needed to convert a drive from NTSF to FAT32. Program worked great. Thanks

I found this program very, very useful! The download process did not require popups nor stupid registrations.This program was easy to configure and operate. The graphic user interface shows the drives available and their current settings. Dragging and moving the partition boundaries with the mouse showed you exactly what changes could be made.Since the program can make changes without reformatting the drive, you can adjust partition sizes on the fly. That feature was exactly what I needed to perform on my new, empty 500gig drive. And the program changed my 80gig backup drive without losing any data too. ...

I found this software everything it was claimed to be. Convenient, effective and user-friendly.

Great Program! Very usser Firendly and a great GUI

EASEUS Partition Manager Home Edition 3.0 is so very excellent in its performance...very very nice.benedict basiao

I am quite pleased with Partition Manager. I encountered a partition error on my hard drive. Because of the error I could not recover the hard drive and had been unable to overcome the error in order to use the hard drive. Partition Manager enabled me to delete the partitions (something I had been unable to do any other way), restore my backup and saved me from throwing away a good hard drive. I don\'t know what actions Partition Manager may not be capable of, but I sure like what it did for me.

Fixed my Asus and it is running well. Thanks for a great product.

EASEUS Partition Master Home Edition most amazing software

I like the Partition Master Home Edition. It is easy to use and works well with W XP. Creating new partition was a breeze. No problems so far!!!!!

Yes,it works! So far I have converted disks from dynamic to MBR no problem. Still learning what all it will do.

it\'s awesome folks!thanks a lot!

this has to be the best partition program available. in a couple of minutes i decreased my e partition and increased my c drive without any problems and as i am a complete novice and 70 years old i can only say keep up the good work

ich bin sehr zufrieden mit EASEUS Partition Manager. Er hat mir erfolgreich geholfen meine Festplatte zu partitionieren. Danke

WOW, this worked like magic. No data lost as I added a partition to my hard drive. This was on a laptop and the whole process was simple and easy to use. Best software I have tried in a long time, wondeerful program.Thanks Ted

Downloaded and have used it twice re-sizing partitions. It worked great. Thanks.

this program dont working witch my hard disc ,My hard disc working but i dont se him i my computer , he is locked or he dont have particion and i dont can make partition witch this stupid program,\" eror \" there are some error occured while writing partition chains on disk...

It quickly added a partition to a hard disc I had fitted to a PC several months ago without any problems.

Didn't always do what it was asked, but mostly good."Free" doesn't work on 64 bit, so can't use now....

didnt help me i had 00 sector bad they cant fix that

I am not having any luck with the program. I have one internal hard drive and 4 external drives. The program is not seeing the drive with the bad boot sector. Are there any limitations to the number of drives on the Demo program?

Unfortunately, by my experience, Partition Table Doctor dosen't work with Vista Business X64,The software dosen't recognize active partition and correct them as damaged.The partition that I attempted to recovery wasn't recovered at all.I hope in a future update for vista x 64

hi all friend this is a nice software mostely important for hard disk health easly remove bad sector so friend i want to regso send to me product licens kay if any body have my cell phone no +923023274421

This program actually works as advertised I tried my different programs that didn't help but this one did. I recovered all my data. Very intuitive GUI. Since the drive was a data disk I ran the program in windows. Did not try run via the boot disk option.

It worked fine I had a problem with the MBR, possibly because my main HDD was PATA and I had another, smaller, SATA drive being used as a backup. When trying to remove ubuntu the fixmbr command caused the MBR to became corrupt and nothing was shown on the C: at all. Downloaded the trial PTD software on another PC and created the boot CD. Booting from the CD on the broken PC and it found the partition and stated it was ok. Bought the retail version repeated the prevous process and with one click everything was back as it was, fully working. ...

i do not underst exactly how it works,especially the defrag section is not what i was expecting,and by the way ,what is best for a computer?-to have only one partition(some people say...and a D-Folder...)or,two...?!...and how to do a partition-re,and what are the risks...?!

Wasted time This does not work with Vista Business at allResizing

fat32 to ntfs on new acer notebook I couldn't get the main partition converted to ntfs from fat 32. The drive was locked? Had to boot in safe mode and do windows file conversion from dos prompt. convert c: /fs:ntfs (volume name was acer) and was able to convert files without losing data. I first tried to transfer all files from one partion to another and covert to ntfs then transfer the files back but, files were in use and couldn't be moved or copied. I am still hesitant to consolidate the partitions - afraid I will lose data. It seems that consolidating partitions reformats the drive ...

My answer to you email It's really nice of you to be interested in people's opinion for you product. I think it's really perfect product. I liked it very much. The problem is that i can't affort to buy it because i need to use it just once. Would be easier to format HDD. But the product is really nice, good for big companies where no one can format and loose info. I was searching for something free:)